Beschreibung
The Substrate pH/Temp S300 Pro 2 from Aquamaster Tools is suitable for measuring the pH and temperature of moist soft substrates and solutions.
Do you want to measure the pH value and temperature of substrates and liquids? Then use the Substrate pH/Temp S300 Pro 2. This meter includes a good quality pH electrode and batteries. The S300 Pro 2 meter is calibrated before shipping and is therefore immediately ready for use.
HOW DOES THE S300 PRO 2 METER WORK?
- Connect the BNC connector of the electrode to the pH meter and remove the protective cap with storage solution from the electrode.
- Rinse the electrode with water and dry it with clean kitchen paper.
- Press the on/off button to turn the meter on.
- Place the electrode into the (soft) substrate or liquid to be measured (make sure the substrate is thoroughly wet/moist otherwise the meter will not work properly).
- Wait until the value becomes stable. The measurement is now ready.
- Press the HOLD key to store the reading. Remember to press the HOLD button again when using the meter.
- After use, rinse the electrode with clean water so that no residue is left on the electrode. Replace the electrode in the protective cap with storage solution.
- Press the on/off button to turn the meter off.
- Store the meter (upright) with KCI storage solution in the protective cap.
Specifications:
| Range | pH: 0.0 ~ 14.0 pH
Temp.: 0°C ~ 50°C (32°F ~ 122°F) |
| Resolution | pH: ± 0.1 pH
Temp.: 0.1 ºC (1.0 ºF) |
| Accuracy | pH: ± 0.1 pH Temp.: ±0.5°C (32°F) Temp. compensation: 0°C – 50°C (32°F – 122°F) |
| Calibration | pH: 2 point auto 4.0 – 7.0 pH |
| Features | Battery indicator & automatic temp. compensation |
| Power supply | 3 × 1.5 Volt AG-13 button cell battery (included) |
| Auto. power-off | After 8 minutes |
| Calibration indicator | With correct calibration |
| Waterproof | IP65 (electrodes are IP67 waterproof) |
| Dimensions | 220 x 40 x 40 mm |
| Weight | 158 grams |
Reviews
There are no reviews yet.